FLOOR, WALL & ROOF PANELS
BENEFITS OF PANELO
PANELO panels are produced in factory and easy to install on site.
High efficient insulation
PANELO panels are suitable for low energy and passive houses. λ=0,025 W/mK
Less workforce on site
Smaller costs on workforce on site.
More floor space
Thinner walls give more space.
Every 10 meters of PANELO wall gives 1 m2 more floorspace.
No thermal bridges
Connections between elements leave no thermal bridges.
No mold in structure
Thanks to closed cell insulation &
innvovative technology there is
no moisture, no air, no mold in structure.
Incredibly strong LVL
and CLT panels. Innovative technology.
PUR INSULATED WOODEN SANDWICH PANELS
SAMPLE WALL SECTION
U value 0,13
Fire protection classification options Ei30 and higher
NATURAL WOOD AND
CLOSED CELL INSULATION.
Panels’ fire performance
NO MELTING, NO BURNING DROPLETS
PUR insulation is closed safely into PANELO sandwich panel. All sides of the panel are covered by wood. Panel has thick LVL board on one side and OSB board on other side. Adding gypsum boards or mineral wool on one or both sides will increase fire classification up to every required levels of specific building.
Rigid polyurethane foam PUR is a thermosetting plastic and does not melt or produce burning droplets under the effects of fire.
Building elements are classified in accordance with EN 13501 “Fire classification of construction products and building elements. Fire protection classification options for PANELO panels are Ei30 and higher.
~30% more efficient
COMPARISON OF PUR (PIR) INSULATION AND MINERAL WOOL
|MINERAL WOOL INSULATION||PUR (PIR) INSULATION|
|Service life||Limited, it loses insulating
properties in time,
the material subsides
|For the service life of
no permanent change
|Extreme cold||Rapid escape of heat,
formation of thermal bridges,
wetting of insulation,
or even formation of molds
|100% fills and seals all cavities
so heat has no chance
|Energy efficiency||Look right||Considerably more efficient,
savings between 30 and 70%.
|Air escape||Yes||No air escape when
closed cell insulation is used.
Minimum escape takes place
when open cell insulation
need for mechanical fixing
(anchoring), high number
application for joints
If you are interested in our product, or have some additional questions, feel free to contact us.